Assessing the Effectiveness of Chemical Marker Extraction from Amazonian Plant Cupuassu (Theobroma grandiflorum) by PSI-HRMS/MS and LC-HRMS/MS.

Employing a combination of liquid chromatography electrospray ionization and paper spray ionization high-resolution tandem mass spectrometry, extracts from cupuassu (Theobroma grandiflorum) pulp prepared with either water, methanol, acetonitrile or combinations thereof were subjected to metabolite fingerprinting. Among the tested extractors, 100% methanol extracted preferentially phenols and cinnamic acids derivatives, whereas acetonitrile and acetonitrile/methanol were more effective in extracting terpenoids and flavonoids, respectively. And while liquid chromatography- mass spectrometry detected twice as many metabolites as paper spray ionization tandem mass spectrometry, the latter proved its potential as a screening technique. Comprehensive structural annotation showed a high production of terpenes, mainly oleanane triterpene derivatives. of the mass spectra Further, five major metabolites with known antioxidant activity, namely catechin, citric acid, epigallocatechin-3'-glucuronide, 5,7,8-trihydroxyflavanone, and asiatic acid, were subjected to molecular docking analysis using the antioxidative enzyme peroxiredoxin 5 (PRDX5) as a model receptor. Based on its excellent docking score, a pharmacophore model of 5,7,8-trihydroxyflavanone was generated, which may help the design of new antioxidants.

LC-HRMS/MS-Based Metabolomics Approaches Applied to the Detection of Antifungal Compounds and a Metabolic Dynamic Assessment of Orchidaceae.

The liquid chromatography-mass spectrometry (LC-MS)-based metabolomics approach is a powerful technology for discovering novel biologically active molecules. In this study, we investigated the metabolic profiling of Orchidaceae species using LC-HRMS/MS data combined with chemometric methods and dereplication tools to discover antifungal compounds. We analyze twenty ethanolic plant extracts from Vanda and Cattleya (Orchidaceae) genera. Molecular networking and chemometric methods were used to discriminate ions that differentiate healthy and fungal-infected plant samples. Fifty-three metabolites were rapidly annotated through spectral library matching and in silico fragmentation tools. The metabolomic profiling showed a large production of polyphenols, including flavonoids, phenolic acids, chromones, stilbenoids, and tannins, which varied in relative abundance across species. Considering the presence and abundance of metabolites in both groups of samples, we can infer that these constituents are associated with biochemical responses to microbial attacks. In addition, we evaluated the metabolic dynamic through the synthesis of stilbenoids in fungal-infected plants. The tricin derivative flavonoid- and the loliolide terpenoidfound only in healthy plant samples, are promising antifungal metabolites. LC-HRMS/MS, combined with state-of-the-art tools, proved to be a rapid and reliable technique for fingerprinting medicinal plants and discovering new hits and leads.

Electromembrane Extraction of Naphthenic Acids in Produced Water Followed by Ultra-High-Resolution Mass Spectrometry Analysis.

Naphthenic acids comprise one of the most toxic compounds of the produced water released from offshore oil platforms. Therefore, developing and applying faster, simpler, and more efficient analytical methods for analyzing naphthenic acids are urgently needed. Electromembrane extraction (EME) uses the electrokinetic migration of target ions through a porous membrane. Herein, the EME method was applied to extract naphthenic acids from produced water. The EME method was optimized, and the optimal conditions encompassed decanol as the organic solvent, the sample with pH 10.0, 5 min of extraction at 200 V, and the ratio 4:1 (borate buffer/matrix, v/v). Electrochemical impedance spectroscopy confirmed charged species' migration from produced water through the EME. Subsequently, all extracts were analyzed by ultra-high-resolution mass spectrometry. The EME efficiency was assessed by comparing the extraction results to the liquid-liquid extraction (LLE) method results. Analytical results showed good linearity for both solvent and matrix curves (R2 > 0.98). Low detection limits ranged from 0.10 to 0.13 µg mL-1 and quantification limits from 0.36 to 0.45 µg mL-1. Precision and accuracy values ranged from -13.3% to 16.5%. These values fit the proposed method, demonstrating that the EME was more efficient than LLE in naphthenic acid extraction. The EME method preferably extracted aromatic compounds with double-bond equivalence from 6 to 8. The EME coupled with ultra-high-resolution mass spectrometry was demonstrated as a promising analytical approach to naphthenic acid extraction as an efficient and more environmentally friendly alternative to conventional extraction methods.

Assessing organophosphorus and carbamate pesticides in maize samples using MIP extraction and PSI-MS analyzes.

The indiscriminate utilization of agrochemicals causes environmental and animal life impacts. In this regard, methodologies have been developed to offer efficiency and quickness for agrochemicals detection. Due to their selectivity and molecular recognition sites, Molecular Imprinted Polymer (MIPs) have been widely employed in some areas, including biotechnology, waste analyses, foodstuff, biological fluids, and others. This work proposed developing a method to determine aminocarb, pirimicarb, dimethoate, omethoate, pyridaphenthion, and fenitrothion pesticides using molecularly imprinted polymer combined with solid-phase extraction (MIP-SPE) for clean-up and paper spray ionization mass spectrometry for their analysis. Extractions analysis for Aminocarb, Pirimicarb, and Omethoate using MIP-SPE showed better performance when compared with MIP and NIP. The R 2 values were found with R 2 > 0.98 for all pesticides, and LODs and LOQs values were 50 and 100 µg kg-1, respectively. The precision and accuracy were assessed at three concentration levels-low, medium, and high. The precision values (interday and intraday) were below 10%, and the variation of recovery was between 80 and 120% for all pesticides. Therefore, it was possible to verify the presence of two carbamates and five organophosphorus without the necessity of preconcentration samples with precision and good recovery. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-022-05464-7.

Direct analysis of naphthenic acids in produced water and crude oil by NH2-surface-modified wooden-tip electrospray ionization mass spectrometry.

This work describes the surface coating of wooden toothpicks with amino groups (NH2) for electrospray ionization mass spectrometry (MS) analysis of naphthenic acids (NAs) in produced water samples and crude oil fractions. NH2 was introduced into the cellulosic material through a silanization reaction using aminopropyltriethoxysilane. An NH2-modified toothpick was inserted into the analyte extraction sample and was subsequently used as an electrospray emitter for MS analysis. The extraction conditions were optimized by analyzing NAs (benzoic acid, 1-naphthoic acid, decanoic acid, 3,5-dimethyladamantane-1-carboxylic acid, and 3,5-dimethyladamantane-1-acetic acid) in pure water, and the best condition was using 5 min of extraction time with the samples under agitation. Modified and unmodified wooden toothpicks were compared, and the intensities of all NAs were higher when using the modified substrates than when using the unmodified ones. Limit of detection (LOD), limit of quantification (LOQ), linearity, precision, and recovery were determined by analyzing decanoic acid in seawater samples. The LOD and LOQ were 2 and 5 µg mL-1, respectively, and a linear correlation (R2 = 0.9927) was obtained with concentrations ranging from 5 to 250 µg mL-1. Precision values ranged from 6 to 13% and recoveries from 89 to 106%. The technique was also employed to analyze three produced water samples, in which decanoic acid was semi-quantified, and the concentrations ranged from 10 to 13 µg mL-1. High abundances of acidic compounds of class O2 with DBEs (double bond equivalents) ranging from 1 to 3 and carbon numbers going from 8 to 12 were detected in the produced water samples. The results suggest that the modification of wooden toothpicks with NH2 might offer a significant advancement in the knowledge of cheap substrates that can improve the sensitivity of analysis of NAs in water samples.

Development of electroanalytical procedure for monitoring of metamizole in organic fertilizers (human urine and struvite) associated with portable equipment.

Urine and struvite are promising organic fertilizers that can replace conventional fertilizers. However, these fertilizers can have some emerging contaminants, such as dipyrone. This drug is one of the main painkillers consumed in the world and its continuous and indiscriminate intake can promote the camouflage of symptoms of other diseases, anaphylactic shock and even death. Thus, a fast, sensitive, inexpensive and portable method for metamizole (dipyrone) determination in several matrices, applied as organic fertilizers, has been successfully developed using portable equipment and bare carbon screen-printed electrodes in conjunction with square wave voltammetry (SWV). The main SWV operating parameters were optimized (equilibrium time (60 s), step potential (6 mV), modulation amplitude (50 mV) and frequency (10 Hz)) using univariate experiments. The proposed method presented a limit of detection of 0.097 ± 0.002 µmol L-1 (RSD = 2.72%, n = 3) for dipyrone in 0.1 mol L-1 HCl and R2 equal to 0.993. The determination in the struvite sample presented a concentration of 0.47 µmol L-1 of dipyrone. Urine sample used in the production of struvite and urine collected from an individual 10h after ingestion of 500 mg dipyrone tablet showed concentrations of 15.2 and 590 µmol L-1 of dipyrone, respectively. The recovery test in fortified struvite sample showed values between 91 and 102% (RSD = 3.1%, n = 3) and of 102% (SD = 3.7%, n = 3) in human urine, indicating that there is no matrix effect. These results reinforce the possibility of applying the proposed method on-site in a practical and fast way, without the need of significant amounts of sample promoting a more sustainable chemistry.

The remarkable structural diversity achieved in ent-Kaurane Diterpenes by fungal biotransformations.

The use of biotransformations in organic chemistry is widespread, with highlights of interesting applications in the functionalization of natural products containing unactivated carbons, like the kaurane diterpenes. A number of compounds with kaurane skeletons can be isolated in large amounts from several plant species and a myriad of biological activities has been related to these compounds. Studies on structure versus activity have showed that, in most cases, in kaurane diterpenes, activity increases with the increase of functionalization. Since naturally occurring kaurane diterpenes usually have limited functional groups to be used as targets for semi-synthetic modifications, production of more polar derivatives from kaurane diterpenes have been achieved mostly through the use of fungal biotransformations. In this review, selected examples the wonderful chemical diversity produced by fungi in kaurane diterpenes is presented. This diversity includes mainly hydroxylation of nearly all carbon atoms of the kaurane molecule, many of them carried out stereoselectively, as well as ring rearrangements, among other chemical modifications. Sources of starting materials, general biotransformation protocols employed, fungi with most consistent regioselectivity towards kaurane skeleton, as well as biological activities associated with starting materials and products are also described.